LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1990 >> Vanagon GL Syncro >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Stop Screw

Throttle Stop Screw

NOTE: Stop screw is set by manufacturer and should not be moved.

If basic factory setting has been changed, turn throttle stop screw counterclockwise until there is a gap between stop and screw. Turn screw until it just touches stop. Turn screw 1/2 turn (180 degrees) further. Check and adjust idle speed and CO.

scientia non olet · About LEMON Manuals