LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1976 >> Rabbit Base, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Alignment (Procedures) >> VOLKSWAGEN >> Adjustment >> Camber >> Dasher (Front)

Dasher (Front)

If adjustment is necessary, loosen nuts attaching ball joint to track control arm. To adjust, insert suitable adjusting tool (40-200) in adjusting holes in control arm and pry ball joint sideways until camber is set to specifications.

NOTE: Difference in camber between wheels should not vary more than 1°.

Tighten attaching nuts and recheck camber.

NOTE: On Dasher models, insert tool from front on right side and from rear on left side.
scientia non olet · About LEMON Manuals