Front Parking Assist Sensor Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

The procedure is the same for all 4 components. 

1. Remove front bumper fascia. Refer to FRONT BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT
2. Unlock and disconnect both electrical connectors (1).
3. Carefully release latches with a screwdriver in the direction of the arrow and pull the sensor for parking assistance (1) out of the brackets.

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.
2. Install front bumper fascia. Refer to FRONT BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT