| Enable Criteria |
- 3000 ms after IGN ON
- do not enter over range (Battery voltage is between 9V to 16V)
- after over range, go in to normal range (Battery voltage is between 9V to 16V) at least Restart (=500 ms) time
- Communication Control Diag.Service = enableRxAndTx or enableRxAndDisableTx
- ControlDTC Disable Diag.Service = On
- Vehicle CAN bus is normal (not Bus Off)
|
| Failure Criteria |
- CCU TEMP PRESURE::CCU InteriorTemp == 0xFF
or CCU_TEMP_PRESURE::CCU_TempEx_AC == 0xFF
- BCM_VOLTAGE::UBatt == 0x3FFF
- IC_MILEAGE::MILE_KM == 0xFFFFFF
|
| Failure/Mature Time |
- 5000 ms (+-10%)
- 2500 ms (+-10%)
- 500 ms (+-10%)
|
| Pass Criteria |
- CCU TEMP PRESURE:: CCU InteriorTemp!= 0xFF
And CCU_TEMP_ PRESURE:: CCU_TempEx_AC! = 0xFF
- BCMVOLTAGE:: UBatt!= 0x3FFF
- IC_MILEAGE:MILE_KM! = 0xFFFFFF
|
| Pass/De-mature Time |
Immediately |
| Failure Aging |
40 Ignition cycles |