| Enable Criteria |
- 3000 ms after IGN ON
- do not enter over range (Battery voltage is between 9V to 16V)
- after over range, go in to normal range (Battery voltage is between 9V to 16V) at least Restart (=500 ms) time
- Communication Control Diag.Service = enableRxAndTx or enableRxAndDisableTx
- ControlDTC Disable Diag.Service = On
- Vehicle CAN bus is normal (not Bus Off)
|
| Failure Criteria |
- Detection of related CCU TEMP PRESSURE (0x302) Message Missing
- Detection of related BCM_VOLTAGE (0x10A) Message Missing
- Detection of related IC_MILEAGE (0x331) Message Missing
|
| Failure/Mature Time |
- 5000 ms (+-10%)
- 2500 ms (+-10%)
- 500 ms (+-10%)
|
| Pass Criteria |
- CCU TEMP PRESSURE (0x302) Message received normally.
- BCM_VOLTAGE (0x10A) Message received normally.
- IC MILEAGE (0x331) Message received normally.
|
| Pass/De-mature Time |
Immediately |
| Failure Aging |
40 Ignition cycles |