| Enable Criteria |
- No BATTERY over voltage (DTC U1100-17 passed)
- No BATTERY low voltage (DTC U1101-16 passed)
- No PT-CAN bus off (DTC U1172-88 passed)
- Hardwire CLAMP (CL.30s) ON
|
| Failure Criteria |
CAN Message BCM_CLAMP_STAT (0x112) is not received for mature time (timeout time) continuously |
| Failure/Mature Time |
500 ms |
| Pass Criteria |
DTC condition is not satisfied for de-mature time continuously |
| Pass/De-mature Time |
Immediate |
| Failure Aging |
- 40 times BCM CLAMP change with DTC condition is not satisfied continuously
- After repair (test pass criteria satisfied), using DTC clear with diagnostic system
|