Installation [12/2023 - 03/2024]: Procedure

INSTALL SPARK PLUG

Refer to INSTALLATION [12/2023 - ]

INSTALL IGNITION COIL ASSEMBLY

GTY1193816

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using an 8 mm socket wrench, install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTE:
If an ignition coil assembly has been struck or dropped, replace it.

CONNECT ENGINE WIRE
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
  Refer to INITIALIZATION [12/2023 - ]