LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2023 >> GR86 Premium, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Relay >> On-Vehicle Inspection [11/2021 - ] >> Procedure

On-Vehicle Inspection [11/2021 - ]: Procedure

  1. INSPECT EFI MAIN RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1047475Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 1 MΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI MAIN relay.

  2. INSPECT C/OPEN RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1047566Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 1 MΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the C/OPEN relay.

scientia non olet · About LEMON Manuals