LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2023 >> GR86 Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Knock Sensor >> Inspection [11/2021 - ] >> Procedure

Inspection [11/2021 - ]: Procedure

  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance according to the value(s) the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Always 532 to 588 kΩ

      If the result is not as specified, replace the knock sensor.

      GTY1047568Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Knock Sensor)
scientia non olet · About LEMON Manuals