Installation [12/2022 - ]: Procedure

NOTE: Do not drop the brake control power supply assembly. If it is dropped, replace it with a new one. Do not hold the brake control power supply assembly by the connector.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Protrusion

   -

   -

   1. Install the No. 1 brake control power supply bracket with 2 bolts.

      Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

      NOTE:

      Align the hole on the No. 1 brake control power supply bracket with the protrusion of the brake control power supply assembly.

NOTE: Do not drop the brake control power supply assembly. If it is dropped, replace it with a new one. Do not hold the brake control power supply assembly by the connector.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Protrusion

   -

   -

   1. Install the No. 2 brake control power supply bracket with 2 bolts.

      Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

      NOTE:

      Align the hole on the No. 2 brake control power supply bracket with the protrusion of the brake control power supply assembly.

NOTE: Do not drop the brake control power supply assembly. If it is dropped, replace it with a new one. Do not hold the brake control power supply assembly by the connector.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Lock Lever

   -

   -

   1. Install the brake control power supply assembly with the 3 bolts.

      Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf) 

   2. Connect the brake control power supply assembly connector and push down the lock lever to engage the claw as shown in the illustration.
      NOTE:

      • When connecting the brake control power supply assembly connector, make sure that the connecting parts of the brake control power supply assembly connector are free of dirt, water or other foreign matter.
      • Be sure to securely connect the brake control power supply assembly connector.

Refer to INSTALLATION [12/2022 - ]

Refer to INSTALLATION [12/2022 - ]

HINT: 

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [12/2022 - 04/2024] , or refer to AUTOMATIC LEARNING CHART [04/2024 - ]