Installation [05/2022 - ]: Procedure
- INSTALL ACCELERATION SENSOR ASSEMBLY RH NOTE:
- Avoid any impact to the acceleration sensor assembly RH.
- Do not drop the acceleration sensor assembly RH. If it is dropped, replace it with a new one.
Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf)
- INSTALL ACCELERATION SENSOR ASSEMBLY LH NOTE:
- Avoid any impact to the acceleration sensor assembly LH.
- Do not drop the acceleration sensor assembly LH. If it is dropped, replace it with a new one.
Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf)
- INSTALL ECU INTEGRATION BOX RH (for RH Side)
Refer to INSTALLATION [05/2022 - ]
- INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LH Side)
Refer to INSTALLATION [05/2022 - ]
- PERFORM DIAGNOSTIC SYSTEM CHECK
- CHECK SRS WARNING LIGHT
Refer to OPERATION CHECK [05/2022 - ]
- INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Refer to AUTOMATIC LEARNING CHART [05/2022 - 08/2024] , or refer to AUTOMATIC LEARNING CHART [08/2024 - ]