LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> GR86 Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> Front Speed Sensor >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

  1. INSTALL FRONT SPEED SENSOR 
    NOTE:
    • Be careful not to damage the front speed sensor.
    • Do not apply excessive force to the front speed sensor harness.

    Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  2. INSTALL FRONT FENDER LINER 
    Refer to PROCEDURE - Step 6
  3. INSTALL FRONT WHEEL 

    Refer to INSTALLATION [11/2021 - ]

  4. CHECK FRONT SPEED SENSOR 
    1. Check if the front speed sensor is not pulled and does not come in contact with the suspension or body while operating the steering.
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Refer to PROCEDURE - Step 5
  6. PERFORM INITIALIZATION AND CALIBRATION 

    Refer to CAUTION / NOTICE / HINT 

scientia non olet · About LEMON Manuals