LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket and the oil level sensor with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Connect the oil level sensor connector.
  2. CONNECT OIL COOLER TUBE 

    Refer to PROCEDURE - Step 7

  3. ADD ENGINE OIL 

    See step  6

  4. INSPECT FOR OIL LEAK 

    See step  7

  5. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 2

  6. INSTALL NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 48

  7. INSTALL NO. 1 ENGINE UNDER COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 49

  8. INSTALL FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH 

    Refer to PROCEDURE - Step 14

  9. INSTALL FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH 

    Refer to PROCEDURE - Step 15

scientia non olet · About LEMON Manuals