Camera Axis Adjustment Value Write [11/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Corolla Cross, 2024 Toyota Corolla Cross, 2023 Toyota Corolla Cross, and 2022 Toyota Corolla Cross. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM CAMERA AXIS ADJUSTMENT VALUE WRITE
- Turn the ignition switch to off.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Enter the following menus: Chassis / Front Recognition Camera / Utility / Camera Axis Adjustment Value Write.
Chassis > Front Recognition Camera > Utility
Tester Display Camera Axis Adjustment Value Write - Perform camera axis adjustment value write.
- Forward recognition camera optical axis learning is complete.
- After optical axis adjustment completes, clear the following system vehicle control history entries.
- Clear vehicle control history (Front Camera System).
Refer to VEHICLE CONTROL HISTORY (RoB) [11/2022 - 11/2023] , or refer to VEHICLE CONTROL HISTORY (RoB) [11/2023 - ]
- Clear vehicle control history (Automatic High Beam System).
- Clear vehicle control history (Front Camera System).