LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR Limited >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System - Service Information >> Engine Switch >> Installation [02/2017 - ] >> Procedure

Installation [02/2017 - ]: Procedure

  1. INSTALL ENGINE SWITCH 
    1. Engage the 2 claws and install the engine switch to the starter switch bezel.
  2. INSTALL STARTER SWITCH BEZEL 

    Refer to PROCEDURE - Step 5 [02/2017 - 10/2017] , or refer to PROCEDURE - Step 5 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 5 [12/2017 - 05/2018] , or refer to PROCEDURE - Step 7 [05/2018 - 09/2019] , or refer to PROCEDURE - Step 6 [09/2019 - 08/2020] , or refer to PROCEDURE - Step 6 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 6 [12/2021 - ]

  3. INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6 [02/2017 - 10/2017] , or refer to PROCEDURE - Step 6 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 6 [12/2017 - 05/2018] , or refer to PROCEDURE - Step 8 [05/2018 - 09/2019] , or refer to PROCEDURE - Step 7 [09/2019 - 08/2020] , or refer to PROCEDURE - Step 7 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 7 [12/2021 - ]

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY 

    Refer to PROCEDURE - Step 11 [02/2017 - 10/2017] , or refer to PROCEDURE - Step 11 [10/2017 - 09/2019] , or refer to PROCEDURE - Step 12 [09/2019 - ]

scientia non olet · About LEMON Manuals