LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR LE >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems - Service Information >> VSC Off Switch >> Inspection [02/2017 - ] >> Procedure

Inspection [02/2017 - ]: Procedure

  1. INSPECT VSC OFF SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) (for LHD) 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.
        GTY752368Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (VSC OFF Switch (Electric Parking Brake Switch Assembly))

        Standard Resistance

        Tester Connection Condition Specified Condition
        13 (+) - 8 (E) Switch pushed Below 1 Ω
        13 (+) - 8 (E) Switch not pushed 10 kΩ or higher

        If the result is not as specified, replace the VSC OFF switch (electric parking brake switch assembly).

  2. INSPECT VSC OFF SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) (for RHD) 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.
        GTY752369Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (VSC OFF Switch (Electric Parking Brake Switch Assembly))

        Standard Resistance

        Tester Connection Condition Specified Condition
        11 (+) - 8 (E) Switch pushed Below 1 Ω
        11 (+) - 8 (E) Switch not pushed 10 kΩ or higher

        If the result is not as specified, replace the VSC OFF switch (electric parking brake switch assembly).

scientia non olet · About LEMON Manuals