LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR LE >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems - Service Information >> Steering Angle Sensor >> Removal [08/2020 - ] >> Procedure

Removal [08/2020 - ]: Procedure

  1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 

    Refer to REMOVAL [08/2020 - ]

  2. REMOVE STEERING SENSOR 
    1. Disengage the claws and pins, and remove the spiral cable sub-assembly from the steering sensor.
      NOTE:

      Do not damage the pins of the spiral cable sub-assembly or guides of the steering sensor.

      GTY495147Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Guide
scientia non olet · About LEMON Manuals