LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> 4Runner TRD Pro >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> VSC Off Switch >> Inspection [08/2015 - ] >> Procedure

Inspection [08/2015 - ]: Procedure

  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY231458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      3 (E) - 6 (OFF) Pressed Below 1 Ω
      Not pressed 10 kΩ or higher
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (VSC OFF Switch)

      If the value is not as specified, replace the VSC OFF switch.

scientia non olet · About LEMON Manuals