LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Sequoia TRD Pro >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer (Service Information) >> Pre-Collision System Warning Buzzer >> Removal [08/2017 - ] >> Procedure

Removal [08/2017 - ]: Procedure

  1. REMOVE FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 12 [08/2017 - 08/2019] , or refer to PROCEDURE - Step 12 [08/2019 - ]

  2. REMOVE COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 14 [08/2017 - 08/2019] , or refer to PROCEDURE - Step 14 [08/2019 - ]

  3. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 15 [08/2017 - 08/2018] , or refer to PROCEDURE - Step 15 [08/2018 - 08/2019] , or refer to PROCEDURE - Step 15 [08/2019 - ]

  4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 17 [08/2017 - 08/2018] , or refer to PROCEDURE - Step 17 [08/2018 - 08/2019] , or refer to PROCEDURE - Step 17 [08/2019 - ]

  6. REMOVE SKID CONTROL BUZZER 
    1. Detach the clamp to remove the skid control buzzer.
      GTY755708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the buzzer connector.
scientia non olet · About LEMON Manuals