General Maintenance [08/2018 - ]: Procedure
- INSPECT DRIVE BELT
Type See procedures 3UR-FE Refer to ON-VEHICLE INSPECTION [08/2015 - ] - REPLACE SPARK PLUGS
Type See procedures 3UR-FE Refer to REMOVAL [08/2015 - ] - INSPECT ENGINE OIL
Type See procedures 3UR-FE Refer to ON-VEHICLE INSPECTION [08/2015 - ] - REPLACE ENGINE OIL AND OIL FILTER
Type See procedures 3UR-FE Refer to
REPLACEMENT [08/2015 - 08/2019] , or refer to
REPLACEMENT [08/2019 - 08/2021] , or refer to
REPLACEMENT [08/2021 - ] - INSPECT COOLING AND HEATER SYSTEM (Except North America)
- Check that the radiator, condenser and/or intercooler is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.
- INSPECT ENGINE COOLANT
Type See procedures 3UR-FE Refer to ON-VEHICLE INSPECTION [08/2015 - ] - REPLACE ENGINE COOLANT
Type See procedures 3UR-FE Refer to REPLACEMENT [08/2015 - ] - INSPECT EXHAUST PIPES AND MOUNTINGS
- Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
- INSPECT AIR CLEANER FILTER
- Remove the air cleaner filter.
- Visually check that the air cleaner filter is not excessively damaged or oily.
- Replace the air cleaner filter with a new one, if necessary.
- INSPECT BATTERY ELECTROLYTE LEVEL (Except North America)
Type See procedures 3UR-FE Refer to ON-VEHICLE INSPECTION [08/2015 - ] - REPLACE FUEL FILTER (Except North America)
Type See procedures 3UR-FE Refer to REMOVAL [10/2016 - ] - INSPECT FUEL TANK CAP GASKET
Type See procedures 3UR-FE Refer to INSPECTION [08/2015 - ] - INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND
- Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.
- INSPECT CHARCOAL CANISTER
Type See procedures 3UR-FE Refer to INSPECTION [08/2015 - ]