Installation [08/2015 - 08/2017]: Procedure

INSTALL SKID CONTROL BUZZER ASSEMBLY

Connect the buzzer connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

Securely connect the connector.

Attach the clamp to install the buzzer.
NOTE:
- Securely insert the clamp into the bracket of the instrument panel reinforcement.
- If the buzzer is dropped, replace it.

INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 54
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 2
INSTALL INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 56
INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 46
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 48