LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Sequoia TRD Pro >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Skid Control Buzzer >> Inspection [08/2015 - 08/2017] >> Procedure

Inspection [08/2015 - 08/2017]: Procedure

  1. INSPECT SKID CONTROL BUZZER ASSEMBLY 
    1. Apply battery's positive (+) lead to terminal 1 of the skid control buzzer, and negative (-) lead to terminal 2. Then check that the buzzer sounds.
      GTY202896Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      Skid control buzzer sounds.

      If the result is not as specified, replace the skid control buzzer assembly.

scientia non olet · About LEMON Manuals