How To Proceed With Troubleshooting [08/2015 - 08/2017]: Procedure

Result

Result: 

NEXT 

See step  2

1. Interview the customer to confirm the trouble.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Use the Techstream to check if the CAN communication system is functioning normally.

   Result

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] 

Result: 

A 

See step  4

1. Check for a DTC and note any codes that are output.
2. Clear the DTC.
3. Recheck for DTCs. Try to prompt the DTC by simulating the original symptom that the DTC suggests.

   Result

   Result	Proceed to
   DTC does not recur	A
   DTC recurs	B

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2017]  

Result: 

A 

See step  5

Result

Result: 

NEXT 

See step  6

Result

Result: 

B 

See step  9

Result: 

A 

See step  7

1. Terminals of ECU

   Refer to TERMINALS OF ECU [08/2015 - 08/2017] 

2. Data List/Active Test

   Refer to DATA LIST / ACTIVE TEST [08/2015 - 08/2017] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

END