LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Tundra TRD Pro >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems (Service Information) >> VSC Off Switch >> Installation [08/2017 - ] >> Procedure

Installation [08/2017 - ]: Procedure

  1. INSTALL VSC OFF SWITCH 
    1. Attach the 2 claws to install the VSC OFF switch into the No. 2 switch hole base.
      GTY569666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the VSC OFF switch connector.
  2. INSTALL NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 25 [08/2017 - 08/2019], or refer to PROCEDURE - Step 26 [08/2019 - ]

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 30 [08/2017 - 08/2019], or refer to PROCEDURE - Step 31 [08/2019 - ]

  4. INSTALL COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 28 [08/2017 - 08/2018], or refer to PROCEDURE - Step 30 [08/2018 - 08/2019], or refer to PROCEDURE - Step 31 [08/2019 - ]

  5. INSTALL FRONT DOOR SCUFF PLATE LH 
    1. for Double Cab:

      (Refer to PROCEDURE - Step 32 [08/2017 - 08/2018], or refer to PROCEDURE - Step 34 [08/2018 - 08/2019], or refer to PROCEDURE - Step 35 [08/2019 - ])

    2. for CrewMax:

      (Refer to PROCEDURE - Step 33 [08/2017 - 08/2018], or refer to PROCEDURE - Step 35 [08/2018 - 08/2019], or refer to PROCEDURE - Step 36 [08/2019 - ])

  6. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 36 [08/2017 - 08/2019], or refer to PROCEDURE - Step 37 [08/2019 - ]

scientia non olet · About LEMON Manuals