LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Yaris iA Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Knock Sensor >> Removal >> Procedure

Knock Sensor: Removal: Procedure

  1. REMOVE KNOCK SENSOR 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL

    2. Remove the plug hole plate.

      Refer to REMOVAL

    3. Remove the intake manifold.

      Refer to REMOVAL

    4. Disconnect the KS connector.
    5. Remove the bolt.
      GTY485292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Vehicle Front *b Bolt
      *c KS - -
      N*m (kgf*cm, ft.*lbf): Specified torque - -
    6. Remove the KS.

      See step  1

scientia non olet · About LEMON Manuals