LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Yaris iA Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Ignition Coil >> Removal >> Procedure

Ignition Coil: Removal: Procedure

  1. REMOVE IGNITION COIL 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL

    2. Remove the plug hole plate.

      Refer to REMOVAL

    3. Remove the connector.
      GTY484511Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Connector
      *2 Ignition Coil
      N*m (kgf*cm, ft.*lbf): Specified torque
    4. Remove the ignition coil.
scientia non olet · About LEMON Manuals