LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> VSC Off Switch >> Removal [06/2016 - ] >> Procedure

Removal [06/2016 - ]: Procedure

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 

    Refer to PROCEDURE - Step 10 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 13 [03/2017 - ]

  2. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transmission) 

    Refer to PROCEDURE - Step 12 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 15 [03/2017 - ]

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 

    Refer to PROCEDURE - Step 5 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 8 [03/2017 - ]

  4. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission) 

    Refer to PROCEDURE - Step 8 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 11 [03/2017 - ]

  5. REMOVE PATTERN SELECT SWITCH ASSEMBLY 
    1. Disconnect the pattern select switch assembly connector.
    2. Disconnect the pattern select switch assembly connector clamp. (for Automatic Transmission)
    3. Remove the 2 screws and the pattern select switch assembly from the shifting hole cover sub-assembly.
      GTY731461Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals