DTC U2300-55: Central Configuration Not Configured [07/2015 - ]: Contents
WARNING: This page is about a different car, the 2016 Scion iA. However, it is still accessible from the selected car via links, so may be relevant.
| DTC No. |
Detection Item |
DTC Detection Condition |
Warning Indicate |
Memory |
Fail-safe Operation |
Note |
| U230055 |
Central Configuration not configured |
Combination meter configuration not implemented |
Not applicable |
DTC Stored |
Not applicable |
- Drive cycle: Not applicable
- Self test type:CMDTC self test, ODDTC self test
|
| Description |
Combination meter configuration not implemented |
| Detection condition |
- The main body ECU does not perform the configuration with the ignition switched ON (engine off or on).
|
| Fail-safe |
Not applicable |
| Possible cause |
HINT:
- To correctly write the configuration data sent from the combination meter to the main body ECU to the main body ECU, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- Combination meter cluster configuration is not completed.
- Main body ECU malfunction
|