LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Yaris iA Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution (Service Information) >> Front Wiring Harness Protector >> Installation >> Procedure

Front Wiring Harness Protector: Installation: Procedure

  1. INSTALL FRONT WIRING HARNESS PROTECTOR 
    1. Install the front wiring harness protector.
    2. Attach the all tabs.
    3. Install the tapes.
    4. Install the bands.
    5. Attach the clips.
    6. Connect the front wiring harness protector.
    7. Attach the clip.
    8. Install the battery and the battery tray.

      Refer to INSTALLATION

    9. Install the air cleaner assembly.

      Refer to INSTALLATION

    10. Connect the negative battery cable.

      Refer to PROCEDURE - Step 1

scientia non olet · About LEMON Manuals