Power Source Mode does not Change to ON (IG and ACC) [09/2016 - 05/2019]: Description

If any of the following operations are performed, the certification ECU (smart key ECU assembly) receives a signal, and changes the power source mode.

With the electrical key transmitter sub-assembly in the cabin, the power switch is pressed.
When the transmitter battery of the electrical key transmitter sub-assembly is depleted, the brake pedal is depressed with the electrical key transmitter sub-assembly held near the power switch.
When the smart key system has been canceled, the brake pedal is depressed with the electrical key transmitter sub-assembly held near the power switch.

RELATED DATA LIST AND ACTIVE TEST ITEMS

Problem Symptom	Data List and Active Test
Power source mode does not change to on (IG) or on (ACC)	Power Source Control Start Switch1 Start Switch2 Latch Circuit ACC Relay Monitor Power Supply Condition IG Relay Monitor (Outside) IG Relay Monitor (Inside)