LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> Prius C Two >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Steering Angle Sensor >> Installation [11/2015 - ] >> Procedure

Installation [11/2015 - ]: Procedure

  1. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 
    1. Install the spiral cable with sensor sub-assembly (Refer to PROCEDURE - Step 1 ).
      NOTE:
      • Do not replace the spiral cable with sensor sub-assembly with the auxiliary battery connected and the ignition switch ON.
      • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the auxiliary battery connected and the ignition switch ON.
      • Ensure that the steering wheel is installed and aligned straight when inspecting the steering angle sensor.
      • Do not remove the steering angle sensor from the spiral cable.
  2. INSTALL UPPER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 11

  3. INSTALL LOWER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 12

  4. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD 
  5. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5

  6. INSTALL STEERING WHEEL ASSEMBLY 

    (Refer to PROCEDURE - Step 7 , or refer to PROCEDURE - Step 7 )

scientia non olet · About LEMON Manuals