LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Heated Oxygen Sensor >> Inspection [06/2016 - ] >> Procedure

Inspection [06/2016 - ]: Procedure

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Measure the resistance according to the value(s) the table below.
      GTY696687Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68 °F) 5.0 to 6.4 Ω
      1 - 4 Always 10 kΩ or higher
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Heated Oxygen Sensor)

      If the result is not as specified, replace the heated oxygen sensor.

scientia non olet · About LEMON Manuals