LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Engine Starting System (Service Information) >> Ignition Switch >> Installation [06/2016 - 03/2017] >> Procedure

Installation [06/2016 - 03/2017]: Procedure

  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Install the 2 screws, and install the ignition or starter switch.
    2. Connect the connector.
  2. INSTALL UPPER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 5

  3. INSTALL LOWER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 6

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 3

  5. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT 

    Refer to PROCEDURE - Step 5

  6. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  7. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel) 

    Refer to PROCEDURE - Step 14

  8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel) 

    Refer to PROCEDURE - Step 15

  9. INSTALL INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 7

scientia non olet · About LEMON Manuals