LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution (Service Information) >> Battery Current Sensor >> Installation [06/2016 - ] >> Procedure

Installation [06/2016 - ]: Procedure

  1. INSTALL BATTERY NEGATIVE TERMINAL 
    1. Install the battery negative terminal.
    2. Tighten the nut.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) 

    3. Connect the engine wire with the nut.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    4. Connect the connector.
scientia non olet · About LEMON Manuals