LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System (Ext) (Service Information) >> Fog Light Assembly >> Installation [03/2017 - ] >> Procedure

Installation [03/2017 - ]: Procedure

  1. INSTALL FOG LIGHT ASSEMBLY 
    1. Engage the clip to install the fog light assembly.
    2. Install the 2 screws.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

    3. Connect the connector.
  2. INSTALL FRONT FENDER LINER 
    1. Install the fender liner with the 3 clips.
    2. Install the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  3. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT 

    See step  1

  4. PREPARE FOR FOG LIGHT AIMING 

    See step  2

  5. INSPECT FOG LIGHT AIMING 

    See step  3

  6. ADJUST FOG LIGHT AIMING 

    See step  4

scientia non olet · About LEMON Manuals