LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Sienna LE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [2GR-FE] (Service Information) >> Crankshaft Position Sensor >> Removal [12/2015 - 08/2016] >> Procedure

Removal [12/2015 - 08/2016]: Procedure

  1. REMOVE W/PULLEY COMPRESSOR ASSEMBLY 

    (Refer to REMOVAL [12/2015 - ] )

  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      GTY298011Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and the crankshaft position sensor.
scientia non olet · About LEMON Manuals