LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Sienna XLE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE) (Service Information) >> Mass Air Flow Meter >> Installation >> Installation

Mass Air Flow Meter: Installation: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
      NOTE:

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    2. Connect the mass air flow meter connector.
  2. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 11
  3. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY 

    Refer to INSTALLATION

scientia non olet · About LEMON Manuals