LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Prius Plug-in >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System (Service Information) (Plug-In) >> Power Steering Ecu >> Installation >> Installation

Power Steering Ecu: Installation: Installation

  1. INSTALL POWER STEERING ECU ASSEMBLY 
    1. Install the power steering ECU assembly with the bolt and 2 nuts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    2. Connect the 4 connectors to the power steering ECU assembly.
    3. Engage the wire harness clamp to the power steering ECU assembly.
  2. INSTALL UPPER INSTRUMENT PANEL 

    Refer to INSTALLATION

  3. TORQUE SENSOR ZERO POINT CALIBRATION 

    Refer to CALIBRATION

  4. ASSIST MAP WRITING 

    Refer to CALIBRATION

scientia non olet · About LEMON Manuals