LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Prius Four >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) (Except Plug-In) >> Fuel Pump >> Reassembly >> Reassembly

Fuel Pump: Reassembly: Reassembly

  1. INSTALL FUEL PUMP 
    1. Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.
      Fig 1: Install O-ring And Spacer
      GTY382168Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 O-ring
      *2 Spacer
    2. Connect the fuel pump harness connector to the fuel pump.
    3. Engage the 5 claws of the fuel pump.
      NOTE:
      • Make sure that the O-ring is not cut or pinched during the installation.
      • Engage the claws securely.
      • Do not remove the suction filter.
    4. Engage the 2 claws of the No. 1 fuel suction support.
    5. Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.
    6. Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.
      Fig 2: Identifying Fuel Pump Filter Hose Groove
      GTY223567Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not apply excessive force to the fuel tube or the suction support.

    7. Connect the fuel pump harness connector to the fuel suction plate sub-assembly.
  2. INSTALL FUEL SENDER GAUGE ASSEMBLY  See step  1
scientia non olet · About LEMON Manuals