Front Door Lock: Inspection: Inspection
- INSPECT FRONT DOOR LOCK ASSEMBLY (for Driver Side)
- Apply battery voltage to the motor terminals and check the operation of the door lock motor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
OK
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock If the result is not as specified, replace the door lock assembly.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Measurement Condition Door Lock Condition Specified Condition 7 (E) - 8 (LSSR) Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)Lock 10 kΩ or higher 7 (E) - 8 (LSSR) Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)Unlock Below 1 Ω If the result is not as specified, replace the door lock assembly.
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) ON (Door lock set to LOCK) Below 1 Ω 9 (L) - 7 (E)
10 (UL) - 7 (E)OFF (Free) 10 kΩ or higher 10 (UL) - 7 (E) ON (Door lock set to UNLOCK) Below 1 Ω If the result is not as specified, replace the door lock assembly.
- Apply battery voltage to the motor terminals and check the operation of the door lock motor.
- INSPECT FRONT DOOR LOCK ASSEMBLY (for Front Passenger Side)
- Apply battery voltage to the motor terminals and check the operation of the door lock motor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
OK
Measurement Condition Specified Condition Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)Lock Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)Unlock If the result is not as specified, replace the door lock assembly.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Measurement Condition Door Lock Condition Specified Condition 7 (LSSR) - 8 (E) Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UL)LOCK 10 kΩ or higher 7 (LSSR) - 8 (E) Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (L)UNLOCK Below 1 Ω If the result is not as specified, replace the door lock assembly.
- Apply battery voltage to the motor terminals and check the operation of the door lock motor.