LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Matrix Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System (Service Information) >> Blower Unit >> Reassembly >> Reassembly

Blower Unit: Reassembly: Reassembly

  1. INSTALL BLOWER MOTOR SUB-ASSEMBLY 
    1. Install the blower motor sub-assembly with the 3 screws.
      Fig 1: Locating Blower Motor Sub-Assembly And Screws
      GTY188473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BLOWER RESISTOR 
    1. Install the blower resistor with the 2 screws.
      Fig 2: Locating Blower Resistor And Screws
      GTY207492Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL CLEAN AIR FILTER 
    1. Install the clean air filter as shown in the illustration.
      Fig 3: Installing Air Filter
      GTY207491Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL AIR FILTER CASE 
    1. Install the air filter case as shown in the illustration.
      Fig 4: Identifying Air Filter Case And Claws
      GTY207490Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL AIR INLET CONTROL SERVO MOTOR 
    1. Install the air inlet control servo motor with the 2 screws.
      Fig 5: Identifying Air Inlet Control Servo Motor And Screws
      GTY176666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals