Window Defogger Wire: Repair: Repair

IF NECESSARY, REPAIR DEFOGGER WIRE
1. Clean the broken wire tips with grease, wax and silicone remover.
  
  Fig 1: Placing Masking Tape Along Both Sides Of Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Place masking tape along both sides of the wire.
3. Thoroughly stir the repair agent ("Dupont" paste No. 4817 or the equivalent).
  
  Fig 2: Applying Small Amount Of Agent To Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a fine tip brush, apply a small amount of the agent to the wire.
5. After a few minutes, remove the masking tape.
  NOTE:
  Do not repair the defogger wire again for at least 24 hours after removing the masking tape.