Traction Off Switch: Inspection: Inspection

INSPECT TRACTION CONTROL SWITCH (A-TRAC SWITCH)

Measure the resistance according to the value(s) in the table below.

Fig 1: Inspecting Traction Control Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
5 (E) - 8 (ATRC)	Pressed	Below 1 Ω
5 (E) - 8 (ATRC)	Not pressed	10 kΩ or higher

TEXT IN ILLUSTRATION

*a	Component without harness connected (A-TRAC Switch)

If the result is not as specified, replace the traction control switch (A-TRAC switch).