Dismounting/Mounting Procedures: Notes
WARNING: This page is about a different car, the 2011 Toyota Yaris, 2010 Toyota Yaris, 2009 Toyota Yaris, and 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized by the tire pressure monitor ECU. See RESET PROCEDURES .
NOTE:
The TPM system is not affected by wheel and tire rotation.
NOTE:
If the negative battery terminal is disconnected, initialize the following system after the terminal is reconnected: Power Window Control System. Refer to owner's manual or appropriate manufacturer service information.