How To Proceed With Troubleshooting

HINT: 

• Use these procedures to troubleshoot the airbag system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. INSPECT BATTERY VOLTAGE 

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

   NEXT: Go to next step 

3. CHECK CAN COMMUNICATION SYSTEM* 
   1. Check for DTC. Refer to DTC CHECK / CLEAR .
      RESULT
      
      

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

      B → CHECK CAN COMMUNICATION SYSTEM. Refer to  PRECAUTION 

      A: Go to next step 

4. WARNING LIGHT CHECK 
   1. Check the warning light. Refer to DIAGNOSIS SYSTEM .

      NEXT: Go to next step 

5. CHECK DTC (Present and Past DTCs)* 
   1. Check for DTC. Refer to DTC CHECK / CLEAR .
      RESULT
      
      

      Result	Proceed to
      DTC is output	A
      DTC is not output	B

      B → PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE  

      A: Go to next step 

6. DTC CHART 

   NEXT: Go to next step 

7. CIRCUIT INSPECTION 

   NEXT: Go to next step 

8. REPAIR 

   NEXT: Go to next step 

9. CLEAR DTC (Present and Past DTCs)* 

   NEXT: Go to next step 

10. CHECK DTC (Present and Past DTCs)* 
    1. Check for DTC. Refer to DTC CHECK / CLEAR .
       RESULT
       
       

       Result	Proceed to
       DTC is not output	A
       DTC is output	B

       B → Go to DTC CHART 

       A: Go to next step 

11. CONFIRMATION TEST 

    NEXT → END