Front Passenger Airbag Assembly: Installation: Installation

WARNING:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Refer to PRECAUTION .

INSTALL NO. 2 INSTRUMENT PANEL WIRE
1. Check that the ignition switch is off.
2. Check that the cable is disconnected from the negative (-) battery terminal.
  WARNING:
  Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
3. Connect the 2 airbag connectors.
  
  Fig 1: Installing No. 2 Instrument Panel Wire Airbag Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  TEXT IN ILLUSTRATION
  
  *1 Locking Button
  
  NOTE:
  Lock the locking button securely.
4. Engage the 2 clamps.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
1. Engage the 10 hooks so that the connector side faces the outside of the vehicle, and install the front passenger airbag.
2. Install the 2 screws.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
Refer to INSTALLATION
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
INSPECT SRS WARNING LIGHT
Refer to DIAGNOSIS SYSTEM