Yaw Rate And Acceleration Sensor: Installation: Installation

1. Install the yaw rate and acceleration sensor with the 2 bolts.

   Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

   NOTE:

   • Do not damage the yaw rate and acceleration sensor.
   • Make sure that the yaw rate and acceleration sensor is installed securely.
   • Do not use dropped or damaged parts.
   • Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.
   • Make sure that the sensor is facing the correct direction.
2. Connect the yaw rate and acceleration sensor connector.
   NOTE:

   Make sure that the yaw rate and acceleration sensor connector is connected securely.

Refer to INSTALLATION

Refer to INSTALLATION - Step 2

Refer to CALIBRATION