LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 87 (Electronically Controlled Brake System (Plug-In) (Diagnostic Codes & Symptom Tests)) >> Electronically Controlled Brake System >> Circuit Tests >> Skid Control Buzzer Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
NOTE:

When replacing the brake booster with master cylinder (skid control ECU), perform initialization and calibration of the linear solenoid valve. Refer to INITIALIZATION .

scientia non olet · About LEMON Manuals