LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Air Conditioning System (Plug-In) (Service Information)) >> Room Temperature Sensor >> Removal >> Removal

Room Temperature Sensor: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY  . Refer to REMOVAL - Step 6
  2. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 7
  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH  . Refer to REMOVAL - Step 9
  4. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 10
  5. REMOVE REAR CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL

  6. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY  . Refer to REMOVAL - Step 2
  7. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET  . Refer to REMOVAL - Step 7
  8. REMOVE FRONT NO. 1 CONSOLE BOX INSERT  . Refer to REMOVAL - Step 8
  9. REMOVE FRONT NO. 2 CONSOLE BOX INSERT  . Refer to REMOVAL - Step 9
  10. REMOVE BOX BOTTOM MAT  . Refer to REMOVAL - Step 10
  11. SEPARATE CONSOLE BOX ASSEMBLY  . Refer to REMOVAL - Step 11
  12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY  See step  4
  13. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY  . Refer to REMOVAL - Step 7
  14. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL ASSEMBLY  . Refer to REMOVAL - Step 14
  15. REMOVE NO. 1 SWITCH HOLE BASE  . Refer to REMOVAL - Step 16
  16. REMOVE ROOM TEMPERATURE SENSOR 
    1. Disengage the 2 claws and remove the room temperature sensor from the No. 1 switch hole base.
      Fig 1: Identifying No. 1 Switch Hole Base, Room Temperature & Claws
      GTY213147Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals