Purge Valve: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL PURGE VSV
1. Install the purge VSV with the bolt.
  
  Fig 1: Identifying Purge VSV & Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
2. Connect the 2 fuel vapor feed hoses and connector to the purge VSV.
  
  Fig 2: Identifying Connector & Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CASE . Refer to INSTALLATION - Step 3
INSTALL INLET AIR CLEANER ASSEMBLY . Refer to INSTALLATION - Step 70
INSTALL AIR CLEANER CAP SUB-ASSEMBLY . Refer to INSTALLATION - Step 5
INSTALL NO. 2 CYLINDER HEAD COVER . Refer to INSTALLATION - Step 99